Unite CD-Maker V2.1c

          Install Notes for Unite CD-Maker V2.1c

                   Cirrus Technology, Inc.

        (C) Copyright Cirrus Technology, Inc., 1997


Contents

--------

This document contains important information regarding the

installation and operation of Unite CD-Maker.  It is 

recommended that this entire document be read prior to 

installing this software.


                * Installation Requirements

                * Installation Description

                * Installation Procedures

                * Update Procedures

                    - Update from WEB Install

                    - Update from Floppy

                * What's Next

                * New Features

                    - V2.1c

                    - V2.1b

                    - V2.1a

                    - V2.1

                    - V2.0

                * Facts


Installation Requirements

--------------------

In order to run the UNITE INSTALL program, your system must meet the 

following criteria:

 

DISK DRIVE.  Your PC must be equipped with a 3.5-inch drive capable of 

reading a high-density floppy disk.  Your PC must have a hard disk with 

at least 4 megabytes of available disk space on the installation

hard disk for the Unite CD-Maker software.

 

OPERATING SYSTEM.  IBM OS/2 WARP Version 3.0 or greater must be 

installed and running on your PC.


OS/2 CD-ROM SUPPORT.  If your PC does not have OS/2

CD-ROM support installed, use OS/2's selective install procedure to

install CD-ROM support.  Refer to your OS/2 documentation for more

information.  After OS/2's CD-ROM support is installed and your

CD-recordable device is attached to your computer, Unite CD-Maker

can be installed.

  

Installation Description

-------------------

The UNITE installation package includes 3.5-inch diskettes.  The INSTALL 

program will create all necessary directories and update CONFIG.SYS 

as noted below.  


Follow the steps below to initially run the INSTALL program; 

 

1.  Invoke an OS/2 FULL SCREEN session.

 

2.  Insert the first Unite CD-Maker Diskette (#1) in a floppy-disk

    drive.


3.  Make the floppy-disk drive that contains the diskette the current 

    drive, (i.e., A:).

  

4.  Type INSTALL and press the ENTER key.


5.  The first install window displays this CDMAKER.TXT file.  Review its

    contents and click on the Continue pushbutton.


6.  Select Update CONFIG.SYS from the second Install window.  If this 

    option is not selected, CONFIG.SYS must be manually updated.


7.  If this is an initial install, the second selection option, Overwrite

    files, may be left unchecked.  If you are reinstalling the software, 

    check the Overwrite files option.


8.  Select the component(s) you wish to install.  If all components

    should be installed, use the "Select all" pushbutton.


9.  Before selecting to continue the install, review the install directory

    provided on the lower portion of the Install - directories window.  

    These is the directory into which the software will be installed.  

    As shown, the default drive is "C", the default directory is "UNITE".


10. After reviewing and modifying, if required, the directory paths; 

    select the Install... pushbutton to continue the installation.


11. The installation program will prompt for the required diskettes.  As

    each diskette is processed, the user is informed by the Install - 

    progress window.  Note:  If not all components were selected to be

    installed, all diskettes may not be required for installation.


12. The user will be informed when the installation has completed.


Update Procedures

-----------------

Follow the steps below to run the INSTALL program to update your current

version of Unite CD-Maker.  


UPDATE FROM WEB INSTALL


1.  From an OS/2 Full screen, change to the directory containing the update 

    files dowloaded from the Cirrus Technology, Inc. WEB Page.


2.  Type INSTALL, and press the ENTER key.


3.  Choose "Update the currently installed product" and click on "Continue".


4.  You may wish to choose "Save a backup version".  Do not choose "Update

    CONFIG.SYS", and click on Update.


5.  Ignore any messages that appear.


6.  Reboot your PC immediately after installation.


UPDATE FROM FLOPPY


1.  Invoke an OS/2 FULL SCREEN session.


2.  Insert the first Unite CD-Maker Install Diskette (#1) in a floppy-disk

    drive.


3.  Make the floppy-disk drive that contains the diskette the current

    drive, (i.e., A:).


4.  Type INSTALL and press the ENTER key.


5.  Select "Update CONFIG.SYS" and "Overwrite Files" from the first Install

    window.


6.  Select the components you wish to be installed from the second window, and

    choose the same directory in which the original product was installed.


7.  The installation program prompts for the required diskettes.  As

    each diskette is processed, the user is informed by the Install -

    progress window.  Note:  If not all components were selected to be

    installed, all diskettes may not be required for installation.


8.  The user is informed when the installation has completed.


9.  Reboot your PC immediately after installation.


What's Next

----------

1.  On a first time install, it is advisable to review the following

    CONFIG.SYS changes to ensure that you area satisfied with the updates.


    Note:  The examples below reflect the default drive and directories.


    a) LIBPATH needs to be modified as follows:

 

       - the location of the Unite CD-Maker libraries should be added

         as the FIRST entry of the LIBPATH statement as follows:


         i.e., LIBPATH=C:\UNITE\LIB;C:\UNITE\SOM30;


    b) PATH needs to be modified as follows:


       - the location of the Unite CD-Maker executables should be added

         as the FIRST entry for the PATH.


         i.e., SET PATH=C:\UNITE\BIN;


    c) Add the following line at the END of the CONFIG.SYS file:


         i.e., SET CIRCFGPATH=C:\UNITE


2.  The Unite CD-Recordable device drivers must be loaded.  All drivers

    provided by Cirrus Technology are installed into the C:\UNITE\BIN 

    area.  The CTCDRFLT.FLT file MUST be copied from the \UNITE\BIN

    directory into the root of your boot device.


        i.e.,  BASEDEV=CTCDRFLT.FLT

               REM the driver below replaces OS2CDROM.DMD /Q

               DEVICE=C:\UNITE\BIN\CTCDROM.DMD /Q


3.  Reboot the PC prior to using the software.


New Features

------------------


V2.1c

------


1.  Support for the Sony CDU-926 CD-recordable device.


2.  Support for the Philips CDD-2600 CD-recordable device.


3.  Support for the Hewlett Packard 6020 CD-recordable device.


4.  Support for the Pinnacle Micro 4X4 CD-recordable device.


V2.1b

------

1.  Fully supported under OS/2 Warp V4.0 (code name Merlin).  The

    online documentation and manual have been modified to the

    Merlin look and feel!  Operationally, Unite CD-Maker works the

    same as under OS/2 Warp V3.0.


2.  Support for the TEAC CDR-50S CD-recordable device.


3.  Support for the Creative CDR-2000 CD-recordable device.


V2.1a

------

1.  Support for the Ricoh RS-1420C CD-recordable device.


2.  Support for the Sony CDU-924S CD-recordable device.


3.  Support for the Smart & Friendly CD-R 2004 CD-recordable

    device.


V2.1

-----

1.  Multisession support for most CD-R drives.  Previously, unless

    you had a Sony CD-R device, the only session that was accessible

    from a CD-ROM/XA multisession disc was the first.  Now, Unite

    CD-Maker gives you the ability to select any session on a

    CD-ROM/XA multisession disc to be recognized as the primary

    CD-ROM volume in the drive.


2.  The Unite CD-Maker documentation is now available on-line!  The

    installation of Unite CD-Maker places an icon title "CD-Maker

    Documentation" in your Unite CD-Maker desktop folder.


3.  If you do not have a CD-recordable device attached to your PC,

    you can now simulate the burn process using the enhanced CD

    Burner icon.  The CD Burner icon has been enhanced to simulate 

    the burn process even though you might not have a CD-recordable 

    device attached to your PC.


V2.0

----

1.  The following new formats are supported:


                *  ISO 9660 Level 1           *  ISO 9660 Level 2

                *  Digital Audio              *  XA Form 1

                *  Multisession               *  Mixed Mode

                *  Enhanced CD


2.  Tracks from CDs can be copied from the CD to your magnetic

    disk.  This operation is performed by inserting the CD into the

    CD-recordable device, double-clicking on the CD Burner icon,

    and activating the "Copy to file" pushbutton on the dialog box.

    This feature facilitates the creation of your own audio CDs!


3.  32-bit APIs are available to facilitate automating the creation

    of CDs.  These APIs include a .VBE file so that Unite CD-Maker's

    APIs can be called from an IBM VisualAge application.  The

    .VBE file is installed into the \VISAGE sub-directory under the

    installation root directory.


4.  Any virtual CD image file can be dropped on the CD Burner icon.


5.  The CD Burner icon displays valid burn speeds based on your

    CD recorder's capability.


Facts

-----

1.  The on-line documentation's contents is more up-to-date than the

    hardcopy documentation.  Please see the on-line documentation for

    information regarding:


        a) Additional APIs

        b) Converting .WAV to Red Book audio format

        c) Creating virtual CD image files that are to be written to a

           multisession CD.

        d) Selecting a session from a CD-ROM/XA multisession disc

           to be the current volume.


2.  The HP 4020i CD-recorder is commonly bundled with an ADVANSYS SCSI

    host adapter (ADVANSYS APB-510).  This adapter is not distributed 

    with a driver for OS/2.  If you plan to use this adapter to control

    your HP 4020i, you will need to manually install the driver as

    follows:


        a)  Copy the file ASC.ADD from the \UNITE\BIN directory to the

            \OS2\BOOT directory.


        b)  Edit the CONFIG.SYS file, and add the entry:

            BASEDEV=ASC.ADD.


        c)  Reboot your PC.


3.  Although many sound files for PCs have an extension of .WAV, not

    all .WAV files are compatible with CD audio. Do not burn .WAV files

    as audio tracks unless they are 16-bit stereo and have a

    44.1KHz sampling rate. 8-bit .WAV files and files that are sampled

    at a rate other than 44.1KHz will not play back properly when

    burned to an audio CD, and playing them could damage stereo speakers.

    All .WAV files created by Unite CD-Maker's "Copy to file" function

    can be safely burned to an audio CD, but .WAV files from other

    sources may not be 16-bit, 44.1KHz files.


4.  Unite CD-Maker is a multi-threaded software.  Setting 

    "PRIORITY=ABSOLUTE" in the CONFIG.SYS file forces all priority 

    to a single thread.  Unite CD-Maker will NOT operate in this 

    environment.  If a priority statement exists in the CONFIG.SYS, it 

    MUST be set to "DYNAMIC".


5.  The Philips, HP, and Yamaha CD-recorders do not reset themselves

    after a "test" burn.  If a "test" burn is aborted, or fails, for any

    reason, the disk must be ejected and re-inserted prior to continuing.


6.  At the time of the release of version 2.1c, a firmware bug exists in the

    HP 6020 and Philips 2600 recorders which can result in the failure to

    copy a track to a file. The copy action will appear to complete successfully

    and immediately, but the track is not actually copied. Ejecting the CD and

    reinserting it should correct this problem.


_________________________________________________________________________

Unite CD-Maker runs under a graphical environment called Presentation

Manager, created by International Business Machines Corporation and 

Microsoft Corporation.


To use Unite CD-Maker under OS/2 Presentation Manager, you need to

license and install IBM's OS/2 WARP Version 3.0 or higher.


Some product names have been used for identification only and may be 

trademarks of their respective companies.

Comments

Category
State
  • 현재 접속자 235 명
  • 오늘 방문자 1,512 명
  • 어제 방문자 965 명
  • 최대 방문자 11,402 명
  • 전체 방문자 2,448,326 명
  • 전체 게시물 3,052 개
  • 전체 댓글수 4,592 개
  • 전체 회원수 104 명

- 쇼핑몰 : Softbox
- 예전 문서 / Old docs
- FTP Server: http://ftp.hanmesoft.com
Facebook Twitter GooglePlus KakaoStory NaverBand