PMVIEW 1.00

마루 0 553 08.10 01:28

INSTALLATION NOTES FOR PMVIEW 1.00

==================================


Installation from harddisk

--------------------------

Create a temporary directory and copy (or unzip) all the 

files to that directory. Then run INSTALL.EXE


Installation from diskette

--------------------------

Format a new diskette and give it the volume label PMVIEW1

Then copy (or unzip) all the files to a diskette. Finally

run INSTALL.EXE


NB! It is required that you label the disk PMVIEW1. If you don't 

do this, the installer will not accept the disk and keep asking 

you for "PMView - Diskette 1".


Installation to a network

-------------------------

Create a temporary directory and copy (or unzip) all the 

files to that directory. Then run INSTALL.EXE

Note that the Installer will not let the SOM DLL path point 

to a network drive. You need to specify a local drive. After

installing, please read README.TXT for more advice on

network installation issues.


Installation error EPFIE602

---------------------------

The user may receive the message "EPFIE602 An error occurred while 

attempting to create a directory. Ensure that you have write access 

to a drive with adequate disk space."


This error may occur if INSTALL.EXE cannot distinguish hard drives on 

the workstation. In this case you need to set the EPFINSTDIR environment

variable before running INSTALL.EXE.


For instance, if OS/2 is installed on the D: drive you should set

EPFINSTDIR as follows:


SET EPFINSTDIR=D:\OS2\SYSTEM

  

NB! If you don't have enough disk space on this drive you may use another

drive and/or directory



LAST RESORT IN CASE THE INSTALLER WON'T START

=============================================


Under special circumstances you may run into the problem that the installer

(INSTALL.EXE) refuses to start. In this case you can use the REXX script below

to install PMView 'manually'. PLease edit the two installation directories 

before running the script.


--------------------------------- Cut here -----------------------------------

/* REXX program for 'last resort' installation of PMView 1.00 */


Call RxFuncAdd 'SysLoadFuncs', 'REXXUTIL', 'SysLoadFuncs'

Call SysLoadFuncs


/* Make sure that these two directories already exist. They will not

   be created by this REXX script! */


PMViewDIR = 'C:\PMVIEW'

SOMObjDIR = 'C:\OS2\DLL' /* This must NOT be a network/removable drive! */


/* Create sub-directories */

'mkdir '||PMViewDIR||'\filters'

'mkdir '||PMViewDIR||'\dmdaemon'


/* Unpack files */

'unpack pmview.@ '||PMViewDIR||' /N:pmview.exe'

'unpack pmview.@ '||PMViewDIR||' /N:pmview.hlp'

'unpack pmview.@ '||PMViewDIR||' /N:pmview.ini'

'unpack pmview.@ '||PMViewDIR||' /N:register.exe'

'unpack pmview.@ '||PMViewDIR||' /N:register.dat'

'unpack pmview.@ '||PMViewDIR||' /N:readme.txt'

'unpack pmview.@ '||PMViewDIR||' /N:order.txt'

'unpack pmview.@ '||PMViewDIR||' /N:ordform.txt'

'unpack pmview.@ '||PMViewDIR||'\dmdaemon /N:instdd.cmd'

'unpack pmview.@ '||PMViewDIR||'\dmdaemon /N:uninstdd.cmd'

'unpack pmview.@ '||PMViewDIR||'\filters /N:contour1.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:contour2.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:contour3.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:contour4.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:contour5.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:contour6.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:contour7.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:contour_.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:diagonal.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:embossi1.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:embossi2.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:embossi3.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:embossi4.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:embossi5.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:embossi6.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:embossi7.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:embossin.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:gradien1.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:gradien2.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:gradien3.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:gradien4.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:gradien5.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:gradien6.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:gradien7.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:gradient.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:high_pa1.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:high_pa2.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:high_pa3.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:high_pas.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:horizon1.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:horizont.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:laplaci1.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:laplaci2.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:laplacia.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:low_pas1.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:low_pas2.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:low_pas3.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:low_pas4.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:low_pass.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:prewitt1.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:prewitt_.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:sobel_ho.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:sobel_ve.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:vertica1.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:vertica2.flt'

'unpack pmview.@ '||PMViewDIR||'\filters /N:vertical.flt'

'unpack pmview.@ '||SOMObjDIR||' /N:dmdaemon.dll'


/* Create Folder */

setup='OBJECTID=<PMVIEWFLD>;'

Call SysCreateObject 'WPFolder','PMView v1.00','<WP_DESKTOP>',setup,'R'


/* Create Program Object */

setup='CCVIEW=YES;EXENAME='||PMViewDIR||'\pmview.exe;PROGTYPE=PM;PARAMETERS=;'

setup=setup||'STARTUPDIR='||PMViewDIR||';ASSOCFILTER='

setup=setup||'*.BMP,*.CUR,*.DCX,*.FIT,*.FITS,*.GIF,*.ICO,*.IFF,*.IMG,*.JPG,'

setup=setup||'*.JPEG,*.LGO,*.MAC,*.MSP,*.PCD,*.PCX,*.PIC,*.PBM,*.PGM,*.PPM,'

setup=setup||'*.PNM,*.PNG,*.PTR,*.RAS,*.RLE,*.SGI,*.SHW,*.TIF,*.TIFF,*.TGA,'

setup=setup||'*.WPG,*.XBM,*.XPM,*.XWD'

setup=setup||';ASSOCTYPE=Bitmap,IFF,GIF,JPG,PCX,Photo CD,Targa,TIFF'

Call SysCreateObject 'WPProgram','PMView','<PMVIEWFLD>',setup,'R'


/* Create Shadow for readme.txt */

setup='SHADOWID='||PMViewDIR||'\readme.txt;OBJECTID=<PMVIEWREADME>;'

Call SysCreateObject 'WPShadow','readme.txt','<PMVIEWFLD>',setup,'R'


/* Register WPS class and create DMDaemon object */

call SysRegisterObjectClass 'DMDaemon', SOMObjDir||'\dmdaemon.dll'

setup='NOTVISIBLE=YES;OBJECTID=<DMDaemon>'

Call SysCreateObject 'DMDaemon','DMDaemon','<WP_DESKTOP>',setup,'R'


/* Deregister MMViewer WPS classes (Warp 4.0 ONLY) */

'c:\mmos2\install\instmmvw -r'


/* Done! */


return


Comments

Category
State
  • 현재 접속자 35 명
  • 오늘 방문자 342 명
  • 어제 방문자 573 명
  • 최대 방문자 4,250 명
  • 전체 방문자 1,355,328 명
  • 전체 게시물 2,613 개
  • 전체 댓글수 4,150 개
  • 전체 회원수 69 명

- 쇼핑몰 : Softbox
- 예전 문서 / Old docs
Facebook Twitter GooglePlus KakaoStory NaverBand