WHATSNEW for eComStation 2.1 GA Release, since eComStation 2.0 GA

마루 0 79,631 2011.05.21 15:07
==== WHATSNEW for eComStation 2.1 GA Release, since eComStation 2.0 GA ====

New Features:

* Include AiR-BOOT (version 1.0.7 final) to allow installation of multiboot
  environments without sacrificing a primary partition (required for most
  Windows 7 preloads)
* Updated ACPIWIZARD to handle APM aware mousedrivers
* AHCI support, enables installation on AHCI only systems. AHCI controllers
  deliver considerably better performance than regular SATA controllers.
* Added AHCI option to preboot menu (currently required to select manually)
* Added BOOTDLY driver, which causes a 20 second boot delay so SCSI
  controller + disks can properly initialize. Driver is added by OS2CSM and
  HWMERGE when a SCSI driver is selected.
* Replaced preboot disk integrity check with version that runs during the
  graphical installation routine. This provides more user interactivity and
  feedback.
* Updated kernel to 14.105, with fix to prevent PROCDUMP trap.
* Updated blue/orange wallpapers
* Updated boot logo

Updated Applications:

* Updated Firefox to version 4.0.1.
* Add K option to Firefox/Thunderbird object so it will stay active when
  started
* Add Exceptq v7.1 to BASEUTIL (improves traphandling in f.e. Firefox 4)
* Add Firefox 3.5.3. to CD #2
* Updated MINILVM to improve backwards compatibility; help updates.
* Updated Archive Viewer to v2.1
* Add p7zip and cpio to BASEUTIL (required for ArcView 7z and RPM file
  support).
* Updated InstPDR to v1.11
* Updated eCo Runtime to version 20101224
* Updated USBDOCK to version 20110319
* Updated NeoWPS * USB Widget to build version 2671
* Updated NETWORK.EXE, MINSTPM.EXE and VIDWZRD.EXE to be eCS 2.1 aware.
* Updated Lucide to version 1.3.3 GA.
* Updated EVFSGUI to version 2.1.1.565 + utils 3.0.37.565
* Updated EVFSIFS to version 1.0.5.5
* Updated EVFSPLUGIN to version 2.0.1
* Updated eStyler to 1.1.93 (support eWP shutdown).
* Updated LLAECS to 1.01.1002
* Updated setboot.exe to Fsys version 1.07
* Updated TIMESET to change default protocol to SNTP
* Updated WarpIn in BASEUTIL to 1.0.19
* Updated Workplace Sans fonts to v0.8 with embedded bitmaps
* Updated DFsee engine to OEM version 10.7
* Updated 4OS2 to version 3.06 (from 3.04h)
* Updated GCC4CORE to 1.1.0 (now includes GCC452)
* Updated preboot menu: autodetect when user supplies DANIS506 driver on
  floppy to add DANIATAP.FLT to generated config.sys
* Updated DATASEEK to version 1.0.1
* Updated DOSCALL1.DLL to match 14.105 kernel
* Updated HARDERR.EXE to match kernel 14.105

Updated / added drivers:

* Added AHCI driver 1.12
* Updated DANIS506.ADD to version 1.8.9. Now AHCI aware.
* Updated ACPI 3.18 package to support kernel 14.105
* Updated Uniaud to version 1.9.26
* Updated e1000e and Nvidia driver to multimac version.
* Updated hw database to new multimac realtek driver, add broadcom devices.
* Updated 168c:1014 NIF file in genmac2.wpi - corrected device ID
* Added detection for 8086:3B56 HDA audio chipset
* Added detection of 14E4:167B Broadcom NIC (B57.OS2 driver)
* Added detection of 8086:27DC Intel NIC (E100B.OS2 driver)
* Removed Genmac support for 8086:104A and 8086:107C, install failed and
  chipsets are now covered by native Intel NIC driver.
* Updated hardware detection database to support new Intel PRO/1000 PCIe
  Updated DFsee engine to OEM version 10.7
* Updated PCIDEVS.TXT to ha_merged, 11 Oct 2010 08:16:43
* Updated POINTDD.SYS to bldlevel 10.070
* Updated LVM.DLL to version 20110111,
* Added LOCK.EXE (from UDF package) to baseutil.
* Updated UNLOCK.EXE to UDF-enabled version
* Updated bootable JFS to 1.9.4, including helper and symbol files
* Updated Bootable JFS files on CD to current 1.9.4 level (was at 1.0.7)
* Updated OS2DASD.DMD and symbol files to 14.105 (was 14.096)
* Updated Panorama driver VBE2GRAD.DLL to fix problems with VirtualBox.

Bugfixes since eComStation 2.0 GA release:

* 2500: [installer phase 1] Implement securit/2 interface in guidproc (block)
* 2825: [other] Unable to install my Lotus Smart Suite 173 (block)
* 2916: [installer phase 1] Genmac misses file (block)
* 2873: [other] Genmac wrapper does not support wireless NIC (block)
* 2874: [other] System sound sounds keep repeating... (block)
* 2972: [installer phase 1] LVM.DLL in German contains wrong version...
        (block)
* 2910: [installer phase 1] Install fails installing Genac 8086 104a NIC
        (crash)
* 2593: [installer phase 3] ALSA sound driver hangs (crash)
* 2485: [booting of CD] Dell Latitude D420 laptop hangs on MEMDISK boot...
        (crash)
* 2917: [other] Krnl  trap e  with PROCDUMP ON (crash)
* 1899: [migration from eCS 1.0 / 1.1 / 1.2] Renaming/Removing ""Previous
        Desktop"" after migration breaks eCenter (major)
* 2799: [other] Digital dwnld dsk 3 installer ""invalid header""
        OO0311-common.wpi, readme's not txt files (major)
* 2812: [other] Panorama VESA drivers GA do not work in virtualbox 3.2 or
        3.0.12 (major)
* 2788: [other] Problems with using Named Pipes (major)
* 2919: [other] Copy link location in browser link destroys the address.
        (major)
* 2819: [other] Register Online ??? (major)
* 2651: [other] ThinkCentre S51 USB does not work (major)
* 2844: [ACPI] USB issues (major)
* 2939: [booting of CD] sys02068  PMWP specified on PROTSHELL on line 163 does
        not contain a valid program (major)
* 2932: [Content] USBXHCD disable PS/2 mouse (major)
* 2950: [other] Programs started with program object have messed up
        environment (major)
* 2763: [Content] Need documentation for formatting large (>2GB) USB data
        sticks (major)
* 1771: [migration from eCS 1.0 / 1.1 / 1.2] Start File & Print Client object
        corrupted in Startup Folder (minor)
* 2095: [migration from eCS 1.0 / 1.1 / 1.2] Volume Manager object not created
        on migration from 1.2R to RC4 (minor)
* 2311: [migration from eCS 1.0 / 1.1 / 1.2] eComCenter/WarpCenter doesn't
        come up on bootup after migration (minor)
* 2586: [other] Supplied md5 not compatible with distributed md5sum.exe
        (minor)
* 2821: [other] APM not installed on T42p although ACPI is deselected (minor)
* 2852: [other] Netop Host OS/2 release v9.00 (2008093) same but public
        without private data (minor)
* 2817: [other] Report on two eCS 2.0GA installs to a 4GB AMD X2 system with
        EIDE &SATA HDDs (minor)
* 2854: [other] Atheros WLAN NIC detected, but drivers installed and
        protocol.ini do not match (minor)
* 2857: [other] Wrong file size in folder message field on big files (GB)
        (minor)
* 2871: [ACPI] Standard reboot and shut down do not work after installation of
        Uniaud 1.9.3/1.9.23 on T60 (minor)
* 2890: [installer phase 1] Entering registration key problem (minor)
* 2897: [other] NTFS driver deals wrong with read only drives... ? (minor)
* 1800: [other] Apply ABIOS patch to OS2LDR (minor)
* 2798: [ACPI] Native Intel driver exists, but installer suggests Genmac
        (minor)
* 2928: [other] SYSTEM CLOCK NOT IN SYNC WITH THE WORLD (minor)
* 2889: [other] Add broadcom NIC to hw detect (minor)
* 2587: [other] DVD-UDF command-line utilities do not appear to be installed
        (minor)
* 2924: [other] WPS problem: bracket in the name (minor)
* 1675: [installer phase 1] Format dialog in installer not modal (NL) (minor)
* 2828: [other] System sounds loop repeatedly (minor)
* 1293: [other] Unregistered Class (minor)
* 2454: [other] Unable to start Dos Window Session with Panorama on M3A78-CM
        Motherboard (minor)
* 2900: [installer phase 1] Missing Vendor/ID for Intel 10/100MB driver
        (E100B.OS2) (tweak)
* 2899: [installer phase 1] Add vendor/chipset ID's to database for hardware
        detection for the e1000e driver. (tweak)
* 2673: [installer phase 1] Realtek 8139 chipset not detected on Medion laptop
        (tweak)
* 2802: [other] Installation problematic (feature)
* 2816: [other] No WLan driver installed (feature)
* 2801: [other] sound not working (feature)
* 2947: [other] 4os2 - Please use current version 3.06 instead 3.04H (feature)
* 2977: [installer phase 1] Add detection... (feature)

  6 resolved block bugs.
  4 resolved crash bugs.
12 resolved major bugs.
22 resolved minor bugs.
  3 resolved tweak bugs.
  0 resolved text bugs.
  0 resolved trivial bugs.
  5 resolved feature bugs.

Total of: 52 resolved bugs.

Bugfixes since eComStation 1.2R GA release:

== block bugs ==

* 2874: [other] System sound sounds keep repeating... (block)
* 2873: [other] Genmac wrapper does not support wireless NIC (block)
* 2916: [installer phase 1] Genmac misses file (block)
* 2825: [other] Unable to install my Lotus Smart Suite 173 (block)
* 2730: [installer phase 1] Trap 0003 in OS2LVM when ignoring minilvm
        warning... (block)
* 2500: [installer phase 1] Implement securit/2 interface in guidproc (block)
* 2758: [booting of CD] Make the default NOT to check the hard disk integrity
        (block)
* 2607: [booting of CD] Hard disk check reports CHS problem with 1,5 TB disk
        (block)
* 2608: [other] eCS is incapable of removing existing disk info (block)
* 1804: [other] Check licenses of GenMac driver (block)
* 1217: [other] CVS repository contains incorrect debug kernel versions
        (block)
* 2328: [other] JFS.IFS does not do full chkdsk if + is specified (block)
* 2680: [other] JFS traps accessing the disk in DASD mode (block)
* 1690: [other] TRAP in JFS after unplugging the USB MSD devices under certain
        conditions (block)
* 2685: [other] JFS destroys disk LABEL when 19 or more drive letters are in
        use. (block)
* 2398: [other] Selecting to format a volume from Drives object blocks the WPS
        (block)
* 2729: [installer phase 1] PCISCAN.EXE chews up system CPU cycles.. (block)
* 2630: [booting of CD] Installation is not completed (block)
* 2568: [other] Silver release  COM-Port not working (block)
* 2542: [installer phase 1] installation stops while executing hwmerge.cmd
        (block)
* 2287: [ACPI] RC6: shutdown with power off over ACPI stop at ""Releasing
        filesystems..."" (block)
* 2543: [installer phase 1] Installation of RC6a on T30 unsuccessfull (block)
* 2510: [installer phase 1] Installer stops in phase 1 migrating from RC6a
        (block)
* 1845: [other] Dumpformatter setup in OS2PDPSIPMDF completely useless
        (block)
* 2489: [booting of CD] ECS cannot read CD/DVD RW unit HL-DT-STDVD-RAM
        GH22NP20 (block)
* 1606: [booting of CD] Trace files not match with kernel 104a... (block)
* 2490: [other] Resetting to standard VGA with SET ENH_SUSPEND=2 in config.sys
        traps system... (block)
* 1824: [other] Snap installation comes up with an invalid monitor mode when
        ending phase 3 migration install. (block)
* 2354: [installer phase 1] Vista gets killed by installing eComStation.
        (block)
* 2218: [installer phase 1] RC5 does not recognise working Vista/Bootit/Ubuntu
        partition layout (block)
* 2465: [booting of CD] T23 with 700 MB crashes with a SYS147 (system out of
        resources) when running RSPINST.EXE. (block)
* 2181: [booting of CD] Installation hang at copying to ramdisk (block)
* 2031: [Content] USB must be deselect on CF-30 (block)
* 2041: [other] RC4 - AMD9550, GigaByte GA-MA78GM-S2H (block)
* 2030: [Content] ACPI blocks installation on CF-30 (block)
* 2140: [other] The order of IFS drivers (block)
* 2149: [installer phase 2] RC5 installer hangs when phase 2 starts (block)
* 2182: [booting of CD] Switch kernel from _W4 to SMP.... 103a and 104a
        (block)
* 2139: [ACPI] eComStation should use UNI or SMP kernel (block)
* 2290: [installer phase 2] TCPIP Install Failed - Error code 29 (block)
* 2185: [installer phase 3] Network issues on RC 5 (block)
* 2202: [booting of CD] Booting from USB cdrom doesn't work (block)
* 2023: [installer phase 2] Genmac gets copied to the wrong path. (block)
* 1883: [other] Large SATA Drives cannot format large (180GB) volumes (block)
* 2109: [installer phase 2] Genmac is installed incorrectly? (block)
* 2216: [booting of CD] Integration of SMP kernel. (block)
* 2226: [installer phase 1] RSPINST fails on SMP kernel on SOME Athlon 64
        machines and in VMware... (block)
* 2094: [Content] The program cmd.exe returned the error value 299 (block)
* 2205: [installer phase 3] Feedback Wizzard is a joke ! (block)
* 2130: [migration from eCS 1.0 / 1.1 / 1.2] Migration does not work (block)
* 2099: [installer phase 2] phase 2 loop (block)
* 2152: [migration from eCS 1.0 / 1.1 / 1.2] Migration from 1.1 HPFS or 2.0B1
        both fail. (block)
* 1966: [installer phase 1] Invalid disk layout, not fixed by disk integrity
        check (block)
* 1894: [installer phase 2] Phase 3 bootup crash (block)
* 1689: [installer phase 2] TRAP on boot after step 2 when no serial ports
        exist (again with RC3) (block)
* 1651: [installer phase 2] TRAP on boot after step 2 when no serial ports
        exist (block)
* 2022: [installer phase 2] Add ecsinstallWARPINinstall.log to log ZIP file
        of installation... (block)
* 2006: [other] zip.exe included in RC4 is defect (block)
* 1997: [other] TCP/IP configuration blows up... (block)
* 1994: [other] Xwlan widget blocks WPS almost complete because of popup...
        (block)
* 1965: [booting of CD] ACPI crashes if selected (block)
* 1932: [other] NTFS.IFS in CONFIG.SYS (block)
* 1426: [installer phase 2] Boot after completed phase 1 stops (block)
* 1569: [other] When plugging the machine into its docking station, it traps
        on boot (RC1) (block)
* 1318: [installer phase 3] Trap 0008 (block)
* 1748: [booting of CD] Boot stops at point when Snap Device Helper Device is
        loaded (block)
* 1773: [installer phase 2] While migrating from RC1, installer halts at
        ""Installing kLIBC Configurator"" (block)
* 1826: [installer phase 1] Nforce4 NIC not detected (block)
* 1792: [booting of CD] Unable to boot V20 RC3 iso CD (block)
* 1572: [installer phase 1] SEINST install failed (block)
* 1610: [installer phase 1] trap 5 in early stages of installation under VPC
        (block)
* 1659: [booting of CD] Experimential features (block)
* 1436: [installer phase 2] Phase 1 completes but booting to phase 2 stops
        after Snap splash screen (block)
* 1580: [other] changing video drivers results in an unstartable system
        (block)
* 1427: [booting of CD] Unicode error when before graphic installation of eCS
        2.0 beta 3A (block)
* 1722: [installer phase 2] Trap 000e ThinkPad R61 (block)
* 1724: [installer phase 1] Due to HW detection order Wireless is put on lan0
        (block)
* 1641: [installer phase 1] Dual Core CPU installs W4 Kernel with ""/SMP""
        option in ACPI.PSD. Result: stop at bootlogo. (block)
* 1693: [installer phase 2] eCS 2.0 rc3 hangs loading drivers at phase2
        (block)
* 1601: [installer phase 1] RC2 Installer puts ACPI /SMP on MB's with Nvida 3
        and  single core CPU's (block)
* 1658: [other] Theme color for eCS (block)
* 1554: [installer phase 2] Unable to operate drive message (block)
* 1449: [installer phase 1] eCS 2.0 Beta3a - Advanced install hangs with
        SEINST (returncode: 0x1604) (block)
* 1316: [installer phase 1] Installing eCS 2.0 over Warp 4 in JFS (block)
* 1510: [booting of CD] Installation stops before first graphics screen
        (block)
* 1608: [booting of CD] eCS2.0 rc2 stops after showing eCS logo/splash screen
        with error message (block)
* 1323: [other] Battery Power Widget and Power object no longer function
        (block)
* 1395: [installer phase 1] LVMI extremely weak (block)
* 2972: [installer phase 1] LVM.DLL in German contains wrong version...
        (block)
89 resolved block bugs.

== crash bugs ==

* 2917: [other] Krnl  trap e  with PROCDUMP ON (crash)
* 2593: [installer phase 3] ALSA sound driver hangs (crash)
* 2485: [booting of CD] Dell Latitude D420 laptop hangs on MEMDISK boot...
        (crash)
* 2910: [installer phase 1] Install fails installing Genac 8086 104a NIC
        (crash)
* 1992: [booting of CD] Disc fingerprint (crash)
* 1524: [other] JFS Autocheck +* results in machine not booting to WPS (crash)
* 2775: [other] Trap in JFS while using pmmail - possible CAD related (crash)
* 2468: [other] FileCommander, Eject Flash disk => system trap (crash)
* 2750: [other] MiniFSD (OS2BOOT) for JFS TRAPS when pressing CAD (crash)
* 2652: [booting of CD] Exception in module GRADD when booting from eCS Silver
        CD (crash)
* 2731: [installer phase 2] Firefox 3.5xx crashes on quicktime plugin (crash)
* 1892: [other] Update the ecs provided OS/2 toolkit (crash)
* 2697: [migration from eCS 1.0 / 1.1 / 1.2] Instpdr.exe is not the latest
        available version in eCS2.0rc7 (crash)
* 2653: [migration from OS/2] migrate.cmd error attempting to remove sound
        (crash)
* 2578: [other] Trap in UNIAUD16 in VirtualBox (crash)
* 2574: [installer phase 2] Install failure with error code 29 (crash)
* 2555: [ACPI] eCS 2.0 crashes after booting (crash)
* 2270: [other] System rarely traps on shutdown (crash)
* 2271: [other] Installation crash (crash)
* 2349: [ACPI] Using the ACPI Wizard causes the machine to hang when rebooted
        (crash)
* 2433: [other] Trap D (crash)
* 2245: [booting of CD] Start using EARLYMEMINIT=TRUE when ACPI is loaded.
        (crash)
* 2410: [Content] Can not re-install any eCS (1.2R, 2.0 RC4,5) (crash)
* 2239: [installer phase 3] ACPI wizard should set SMP switch with AMOUSE
        (crash)
* 1916: [other] Trap on boot with SMP and JFS to boot disk (crash)
* 2353: [other] PC Locks up. (crash)
* 2308: [installer phase 1] Booting from USB CD-ROM results in trap 000D
        SDDHELP (crash)
* 2250: [installer phase 1] ECS 20RC5 RESOURCE.SYS crashes with VirtualBox
        memdisk error during install (crash)
* 2366: [other] OOo3.1.0.beta spell check crashes Open Office (crash)
* 1709: [booting of CD] Installing eCS 2.0 RC3 on Dell Inspiron 9400: OS/2 !!
        SYS01720 (crash)
* 2249: [booting of CD] SMP/DBCS NLS install CD crashes during PM
        initialization (crash)
* 1710: [booting of CD] Systems crashes with 4 GB of RAM (crash)
* 2240: [booting of CD] Sticky flags not correct! (crash)
* 2061: [booting of CD] Add an option to boot with 0 bytes os2logo (crash)
* 2219: [other] BackAgain II freezes machine on reading a particular OOo
        directory - even TOP won't run! (crash)
* 1945: [other] TRAP 000E under heavy network load (crash)
* 1376: [other] APCI fails to boot on Dell Optiplex GX620 (crash)
* 1843: [installer phase 1] Trap 3 at end of phase 1 install (crash)
* 1913: [other] two issues: hangs during installation and finnaly unable to
        operate the disk (crash)
* 2159: [other] trying to use usb audio on intel quad motherboar with nvida
        chipset (crash)
* 2025: [other] ACPI wizard must warn when none SMP kernel is installed and
        people specifiy /SMP is used. (crash)
* 1982: [other] TRAP in resource.sys (crash)
* 2045: [other] Unable to operate Hard Disk after install and boot of eCS 1.2
        (crash)
* 1973: [other] can't boot after installation (crash)
* 1838: [ACPI] eCS 2.0 RC4 - ACPI v3.05 - Crash with SMP on Athlon64 X2 3800+
        (crash)
* 1940: [other] Crash with FAT 32 IFS and USB removeable devices, need updated
        FAT32 IFS (crash)
* 1850: [other] install printer freezes system (crash)
* 1914: [other] Thinkpad T30 traps after suspend/resume (crash)
* 1942: [other] Crash with SMP enabled (crash)
* 1876: [other] Enbedded devices (crash)
* 1884: [other] IBMCOM/MACS Flooded (crash)
* 1548: [other] ecs 2.0 rc1 crash (crash)
* 1324: [installer phase 1] Inicial phase of installation (ECS 2 beta 2)
        freezes (crash)
* 1869: [Content] ecs 2.0rc4 crashes (extendfs.exe) (crash)
* 1888: [other] Innotek Font Engine (crash)
* 1711: [installer phase 1] System crashes without /!BIOS (crash)
* 1752: [installer phase 1] Trap E in OS2KRNL on starting install (crash)
* 1551: [booting of CD] eCS 2.0 RC1 traps on TP T20 (crash)
* 1599: [other] eCS 2.0 RC2 - ACPI, SMP Kernel, Dell 1400 SC Dual Intel Xeon -
        eCS Traps after splash screen disappear (crash)
* 1571: [migration from eCS 1.0 / 1.1 / 1.2] Trap 0008 during initial install
        (crash)
* 1780: [other] System freezes on focus change (crash)
* 1685: [other] Network reconf no longer works (crash)
* 1795: [other] Selective installer for networking destroys system (crash)
* 1202: [installer phase 1] JFS won't install (crash)
* 1542: [other] Beta4: Unstable on HP Omnibook (crash)
* 1366: [installer phase 2] Phase 2 boot stops with os2dasd.dmd ecs 2 beta m2
        (crash)
* 1688: [booting of CD] Install eCS 2.0 RC 3 in Virtual PC (crash)
* 1602: [installer phase 2] SMP detection in RC 2 finds SMP CPU in phase 1
        while _W4 kernel in installed (crash)
* 1581: [booting of CD] system trapped with 0008 (crash)
* 1478: [installer phase 2] eCS 2.0 Beta 4 - ACPI, SMP Kernel, Athlon64 X2 -
        eCS hangs on first reboot (crash)
* 1224: [other] Escape GL leaks memory (crash)
* 1448: [other] eCS 2.0 Beta3a - LVM GUI in advanced install will crash/hang
        if you press the 'numlock' key (crash)
* 1405: [installer phase 1] Unable to install ecs beta2 milestone2 (crash)
* 1479: [other] eCS 2.0 Beta 4 - EPM missing (crash)
74 resolved crash bugs.

== major bugs ==

* 2950: [other] Programs started with program object have messed up
        environment (major)
* 2932: [Content] USBXHCD disable PS/2 mouse (major)
* 2939: [booting of CD] sys02068  PMWP specified on PROTSHELL on line 163 does
        not contain a valid program (major)
* 2651: [other] ThinkCentre S51 USB does not work (major)
* 2844: [ACPI] USB issues (major)
* 2819: [other] Register Online ??? (major)
* 2919: [other] Copy link location in browser link destroys the address.
        (major)
* 2788: [other] Problems with using Named Pipes (major)
* 2812: [other] Panorama VESA drivers GA do not work in virtualbox 3.2 or
        3.0.12 (major)
* 2799: [other] Digital dwnld dsk 3 installer ""invalid header""
        OO0311-common.wpi, readme's not txt files (major)
* 1899: [migration from eCS 1.0 / 1.1 / 1.2] Renaming/Removing ""Previous
        Desktop"" after migration breaks eCenter (major)
* 1671: [booting of CD] Text in README.TXT of Boot2 menu isn't correct (major)
* 2190: [installer phase 1] LVM error on 1000GB harddisk (major)
* 2261: [other] Repository contains broken df_ret.exe for 14.103a retailw4
        (major)
* 2596: [other] Problem with LLAeCS (major)
* 2107: [other] Requester does not start (major)
* 2399: [other] JFS (Long) format takes too long time (major)
* 2306: [Content] eCS 2.0 RC6a detects 0 cpus on a dual Opteron Tyan S2895
        board (major)
* 2582: [other] Very bad video graphic performance. (major)
* 2301: [other] pmformat cannot UDF format rewriteable discs (major)
* 2738: [other] Format dialog has JFS radio button disabled (major)
* 2267: [installer phase 2] FIBASE install failed (eComStation 2.0 Japanese
        Preview) (major)
* 2713: [booting of CD] PMFOMAT no HPFS formatting possible in 2.0 NL-SE
        (major)
* 2722: [other] No NIC Support on Thinkpad T60 (major)
* 2720: [other] DOS support does not work on RC7 with Intel L440GX+ system
        (major)
* 2727: [installer phase 1] installation hangs ""merging additional driver
        selections"" (major)
* 2602: [installer phase 1] Says: ""Merging Additional Driver Selections"" and
        just stays there  -- forever. (major)
* 1656: [booting of CD] SCSI not detected in preboot (major)
* 2622: [other] Video Driver Wizard fails to finish the job (major)
* 2480: [booting of CD] Expand LIBPATH to make it include paths with drive
        letters (major)
* 2690: [other] ecs 2.0 rc7 hangs on bootlogo (major)
* 2684: [ACPI] Problem with DOS (major)
* 2597: [installer phase 1] Hangs right after (major)
* 2014: [other] USB drives not working after install (major)
* 2683: [other] No Internet when Virtual Switch of VirtualPC 5.1 is installed
        (major)
* 2631: [installer phase 3] eCs Silver runs well after install but.....
        (major)
* 2603: [installer phase 3] VMOUSE MISSING - MOUSE NOT WORKING IN WINOS2
        (major)
* 2627: [installer phase 1] Error! Since you did not format the installation
        harddrive... (major)
* 2675: [ACPI] Installing RC7 without ACPI does not install APM either (major)
* 2231: [Content] German specific characters are not printed (major)
* 2674: [other] unable to use mouse in WinOS2 window or full screen (major)
* 2164: [other] Icon creep is back. (major)
* 2560: [other] old pcmcia drivers (major)
* 1928: [other] Cardbus system is not supported. (major)
* 2640: [other] DOS properties incorrect or missing from properties notebook
        (major)
* 2275: [other] ecs can't open network ports during the booting after exit
        from Win-xp (major)
* 2441: [installer phase 1] os2cdrom.dmd fails to load prior to phase 1
        (major)
* 2475: [other] Screen gets black due to some networking conflict...or?
        (major)
* 2034: [Content] Logical partition FAT16, not recognised after installation
        (major)
* 2558: [other] DOS and Win16 Sessions Properties messed up, probably causes
        also no Mouse actions in either type session (major)
* 2585: [other] Wireless monitor does not configure IP interface (major)
* 2288: [other] Can't listen mp3 over network (major)
* 2533: [other] ICON creep is still there! (major)
* 2534: [ACPI] ACPI docs? (major)
* 2412: [installer phase 2] ethernet and wireless not detected when install to
        Lenovo ThinkPad W500 (major)
* 2253: [other] After booting 1.2R, RC3 & RC5 fail to boot until RC2 has been
        booted (major)
* 2434: [other] USB Printer Installation (major)
* 2317: [migration from eCS 1.0 / 1.1 / 1.2] Trap at beginning of installation
        phase 3 (major)
* 2342: [migration from OS/2] Installing eCS 2.0 RC6a over Warp 4 in JFS
        (major)
* 2497: [other] shutdown does not complete - without eWorkplace (major)
* 1552: [installer phase 1] SCSI Driver selection during Install phase I
        (major)
* 1387: [booting of CD] USB mass storage devices do not work when PCMCIA
        support is loaded (major)
* 1785: [booting of CD] CPQCISS.ADD drivers is required to be first .ADD
        driver in config.sys (major)
* 2491: [installer phase 1] rogue C: drive causing Install Phase 1 to fail
        with 0x1 error (major)
* 2151: [Content] ACPI Wizard (eCS 2.0 RC5) doesn't complete all tasks (major)
* 1820: [ACPI] ACPI wizzard doesn't do was it shows (major)
* 2204: [installer phase 3] Can't install a printer (major)
* 2082: [booting of CD] LSI/Symbios 320 SCSI driver is not present (major)
* 2382: [other] EPM crashes after a while if two instances are running.
        (major)
* 1828: [other] Maintenance Desktop Unuseable. (major)
* 1782: [installer phase 1] Is there a 500G limit on HDD size? (major)
* 2408: [other] TZ data still needs fixing (major)
* 1734: [installer phase 1] eCS 2.0 RC3 - DOS drivers installed even when
        DOS/Win-OS/2 has been deselected (Advanced install) (major)
* 2134: [booting of CD] Installation on Windows (XP) VPC 2007SP1 fails (major)
* 2116: [ACPI] with ""power off option"" selected TP42P system freezes at
        ""releasing files"".... and>>>> (major)
* 2318: [installer phase 1] SMP kernel is installed even when ACPI is not
        (major)
* 2184: [other] Virtual VPC blocks requester on RC 5 (major)
* 2276: [installer phase 3] eCS 2.0 RC6: Respect EARLYMEMINIT setting of the
        installer (major)
* 2457: [migration from eCS 1.0 / 1.1 / 1.2] USB function does not work
        totally (major)
* 2195: [other] XWireless LAN Monitor - signal drops out when accessing
        network (major)
* 2117: [other] Seamonkey crashes when reading mail/newsgroups (major)
* 2443: [other] PEER/LAN blocks for login on login failure (major)
* 2229: [installer phase 2] Installation CD drive not recognized after phase 2
        (major)
* 2387: [booting of CD] Cannot install (major)
* 2348: [other] Shutdown fails to Power Off or display message indicating that
        it is safe to do so (major)
* 2381: [other] APL2 unable to allocate workspace of 256MB with over 700MB
        free after system has been up for a while (major)
* 2396: [ACPI] ACPI hangs at start of phase two of install. (major)
* 2395: [installer phase 1] Phase 1 aborts with code 0x3; description reads
        HWMERGE install failed (major)
* 2419: [installer phase 2] Deselecting TCP/IP protocol on network
        installation leads to abortion of install phase 2 (major)
* 2411: [installer phase 1] Regression in guidproc instvols.dll results in
        rspinst error 906 (major)
* 2404: [installer phase 2] Bug in install script stops install (major)
* 1794: [installer phase 1] Install failure Similar to ticket 1294 (major)
* 2373: [other] Installed OS recogises USB Flash Drive and assigns Letter but
        unable to ready from Flash Drive. (major)
* 2378: [booting of CD] MAKEDISK fails from RC6a CD (major)
* 2201: [booting of CD] Selecting ""edit config.sys"" in preboot menu prevents
        ALT-F2/F4 from working (major)
* 2347: [other] Update WarpIn to version 1.0.18 (major)
* 2346: [other] Lack of audio support due to no HDA alternative (major)
* 2337: [ACPI] Installing ACPI breaks USB (major)
* 1787: [other] Not possible to select paper layout with LaserJet driver
        version 30.827 (major)
* 2320: [other] USBRESMGR.SYS not in config.sys file (major)
* 2257: [other] eWP Reboot hangs on Command Windows (i.e. cannot close unless
        'skip') (major)
* 1870: [other] SUBSTP utility no longer works (major)
* 2010: [Content] Realtek Ethernet Driver fails installing: ""No PCI BIOS
        system detected"" (major)
* 2235: [ACPI] RC2 with ACPI3.11 - DOS/WinOS2 do not work anymore (okay with
        3.10) (major)
* 2093: [other] Strange behavior when huge cache assigned to JFS (major)
* 2220: [ACPI] Unable to access COM Ports (major)
* 2115: [installer phase 2] loop starting pmshell.exe on virtual PC (major)
* 2120: [booting of CD] Boot of installation CD hangs at pcibus.snp (major)
* 1568: [installer phase 1] System hangs after first stage install (RC1)
        (major)
* 2089: [installer phase 2] Installer Phase 2 startup.cmd error 25? (major)
* 2142: [installer phase 2] Fail to boot when using JFS boot partition (major)
* 1697: [installer phase 1] RC3 fails after ""Enter Registration"" before
        install (major)
* 1898: [other] PVCS hangs desktop when run from drive that was mounted with
        samba client to network share (major)
* 2110: [installer phase 1] Installation fails on ABIT IP35 Pro fails (major)
* 1527: [other] eStyler shutdown erroneously switches to ACPI mode (major)
* 2113: [installer phase 2] Hangs phase 2 (major)
* 1938: [installer phase 1] When booting the disc checker reports no problems,
        minilvm reports a corrupted partition table. (major)
* 2272: [other] No support for high end Oki Multifunction Machine (major)
* 2247: [other] Update artwork for RC6 (major)
* 1559: [other] Installation of Sound Blaster 16 does not work in VPC (major)
* 2125: [other] Wrong version of Sound Card driver installed/shipped with eCS
        (major)
* 2262: [installer phase 1] Modify load order of USB host drivers in HWMERGE
        (major)
* 1968: [installer phase 2] Phase 2 does not start with more than 2GB of RAM
        (major)
* 2156: [installer phase 1] Genmac installs incorrectly on T42 (major)
* 2119: [other] Serial port support installed (major)
* 1563: [installer phase 1] (eCS 2.0 RC1) USB key seems empty? (major)
* 2173: [other] GenMAC/XWLAN does not work with non-SMP kernel installed for
        Thinkpad T30 (and possibly others) (major)
* 1702: [installer phase 3] ecs 2.0 it_it rc3: acpi wizard does not install
        SMP kernel for Dell notebooks (major)
* 2170: [installer phase 3] RC5 install installs AMOUSE even when this is
        DE-SELECTED from the install. (major)
* 2063: [installer phase 1] hwmerge should be checked for copy order of files
        from memdisc to hard disc. (major)
* 2078: [ACPI] RC5 on Thinkpad T43 will not power off (major)
* 2081: [installer phase 2] Invalid order in PATH (major)
* 1817: [other] Clean up root / (major)
* 1575: [other] eCS 2.0rc1 - Loosing network connection (peer) to WinXP and
        eCS 1.2 computer (major)
* 1864: [other] EVFS (Samba) appears to corrupt filenames when reading (major)
* 2112: [other] ESAMBAC.WPI Some Samba client files are outdated (major)
* 2230: [ACPI] several (probably) ACPI relates problems on an Dell Latitude
        D530 (major)
* 2210: [other] LVM14105 update NOT merged with RC5 installation media (major)
* 1362: [other] Newer USB mice fail to track properly with USB mouse driver
        (major)
* 1854: [booting of CD] eCS20RC4 runs very slowly with CD and DVD attached
        (major)
* 2137: [other] Network connections die when system warning beeps (major)
* 2098: [installer phase 1] Can't find OS/2 desktop (major)
* 2091: [other] ithemes appears to be broke (major)
* 1812: [installer phase 2] Hangs at boot logo - RC4 (major)
* 2188: [other] No sound (major)
* 2169: [installer phase 2] Installer does NOT crate Network Object (major)
* 2132: [other] High cpu usage from ssesctl.exe with SMP (major)
* 2189: [ACPI] No PowerOff at Shutdown (major)
* 2191: [installer phase 3] Installer hangs booting phase 3 (major)
* 1652: [other] Added a ITB Drive to system and miniLVM doesn't see it (major)
* 2178: [installer phase 2] The uniaud driver fails to install when selected;
        seletive install fails also (major)
* 2087: [installer phase 1] Uniaud is not installed because of source error
        (major)
* 2167: [other] CFCHECK.EXE may corrupt SET PATH= statement in CONFIG.SYS
        (major)
* 2012: [other] mouse doe not work after install (major)
* 2123: [other] Objects stay cross-hatched even when the app is closed (major)
* 2124: [other] Firefox hangs when opening ""Options"" or ""downloads""
        (major)
* 2118: [other] DOS - it should not be installed (major)
* 2114: [installer phase 1] install does not include netbios protocol on
        virtual PC (major)
* 2070: [other] RC5 (eDG version): message files not found (major)
* 1375: [installer phase 2] Failed TCP/IP install due to 4Gb free space bug
        (major)
* 2055: [other] Don't integrate eCoSoft dlls to other packages (major)
* 1719: [installer phase 3] Trap D in MOUSE$ using AMouse (major)
* 1844: [other] Selecting wrong driver for NIC (major)
* 1917: [installer phase 1] Intel 82566MM (PCI ID 8086:1049) not detected
        (major)
* 1891: [installer phase 1] nForce5 NIC not recognised by the installer
        (major)
* 1763: [installer phase 1] Text on NetWare Settings page is completely
        incorrect (refers to PEER settings); only two settings available (major)
* 2024: [other] open office needs a running netwok (major)
* 2007: [installer phase 1] Continued: Wrong time zone data (after updates)
        (major)
* 2000: [other] eWPS Trash Can strange behavious (major)
* 1632: [other] Can't open pm windows after running for a period of time.
        (major)
* 1964: [booting of CD] Unable to boot CD (major)
* 1918: [installer phase 2] Default NET.CFG created in root of boot volume
        contains incorrect entries (major)
* 1958: [other] The Internet Assistant and eCSCoNet don't work with
        RTL8139.nif (major)
* 1827: [installer phase 2] Reboot from phase 1 to phase 2 always reboots to
        wrong partition (major)
* 1730: [booting of CD] CD won't  boot installer with acpi activated and if
        disabled, program immediately asks for install cd (major)
* 1518: [booting of CD] System Hangs on Boot Logo (major)
* 1954: [installer phase 1] installation problem with SATA DVD (major)
* 1971: [other] Mouse driver (major)
* 1696: [installer phase 3] eCS 2.0 rc3 protocol.ini invalid during final boot
        (major)
* 1967: [installer phase 1] At Phase 1, if you try and Alt-F1, F2 to get a
        command prompt, ibm1s506.add is used instead of danis506 (major)
* 1111: [installer phase 1] Disk MBR rewritten, causing loss of alternate boot
        manager (major)
* 1849: [other] DOS Session Window (major)
* 1924: [other] Power off not completed (major)
* 1974: [other] a usb falsh disk can be identified but can't be accessed
        (major)
* 1907: [other] evfsgui.exe currently not NLS ready (major)
* 1861: [Content] RC4 Install Hangs on First Reboot to JFS Part (major)
* 1815: [other] eComstation won't install on a modern high end machine (major)
* 1879: [other] PMMail exits sometimes. (major)
* 1912: [other] Problems with Object Rexx (major)
* 1848: [installer phase 1] unable to migrate (major)
* 1915: [other] eStylerLite has lost ""Shutdown"" tab (major)
* 1822: [other] xwlan assigns unwanted ipaddresses to interfaces (major)
* 1878: [other] Boot on ThinkPad T41 has problem and then fails... (major)
* 1875: [other] Network fails with 1.5 and 2GB RAM, 1GB OK (major)
* 1871: [other] Mapped drive shows no contents in GUI, but contents show in
        command line prompt and with FM/2 (major)
* 1897: [other] Unable to see files in shares located in local machine using
        Virtual Filesystem for SMB (major)
* 1840: [other] Installation of kernel 14.104a causes system to shut down in
        less than five minutes (major)
* 1821: [other] eCSklibcbin utilities is in %PATH% (major)
* 1867: [other] FT2Lib.DLL is at the 1.40 version, which causes crashes, and
        incorrect displays (major)
* 1835: [installer phase 1] Nforce2 NIC not detected (major)
* 1565: [installer phase 1] (eCS 2.0 RC1) Disk resize does nothing (major)
* 1796: [installer phase 2] GenMac needs to be installed completely on HD
        (major)
* 1704: [other] If both GenMAC wirless interface and second inteface have
        TCPBuei enabled, Peer will not start (major)
* 1625: [installer phase 2] eCS 2.0 rc2 error code 85 when USB CD-ROM support
        is requested (major)
* 1700: [installer phase 3] ecs 2.0 it_it rc3: finalization wizard writes USER
        variable uppercase (major)
* 1620: [booting of CD] Icon drift in RC1 and RC2 (major)
* 1655: [booting of CD] Disk integrity check is confusing (major)
* 1421: [other] eCS 2.0 Beta 3A - Adapters and Protocols (major)
* 1654: [other] Programs crash when moving mouse pointer over them (major)
* 1587: [installer phase 1] Ecomstation 20Rc1 does not install. (major)
* 1578: [other] cannot share attached printer in 2.0b after successful local
        logon (major)
* 1616: [other] ACPI V3.01 and V3.02, system slows down so much that keyboard
        keys are missed (major)
* 1425: [installer phase 1] Audio Card Not Recognised (major)
* 1624: [booting of CD] eCS 2.0 rc2 installation CD boots but hungs at
        eComStation logo screen (major)
* 1294: [other] 2.0 Beta1.1 fails to boot to phase 2 even as phase1 completed
        successfully (major)
* 1738: [other] After successful installation, 'Selective Install for
        Networking' causes a loop in phase 2 (major)
* 1628: [other] Firefox exits (major)
* 1546: [installer phase 1] nForce430 LAN and Audio not recognized by eCS 2.0
        RC-1 (major)
* 1712: [installer phase 2] LAN not working, IBMLVL.INI not readable by
        MPTS.exe (Trap) (major)
* 1382: [booting of CD] Can't Boot Beta2M2 on Dell Inspiron 6400 (major)
* 1505: [other] GenMac wrapper for Broadcom NetXtreme requires reboot to start
        F & P client, if line not available at boot-time! (major)
* 1402: [installer phase 1] Installer will not start on Compaq 7400 computers
        (major)
* 1726: [ACPI] RC3 won't install (major)
* 1413: [other] Single Mouse Driver Does not support Compaq Portables (major)
* 1634: [installer phase 1] GenMac driver v2.0 doesn't work for Intel 3945
        a/b/g device (major)
* 1746: [other] Need to update the Samba client code in the EVFS package
        (major)
* 1392: [installer phase 2] System hangs phase 2 (major)
* 1442: [installer phase 1] DFSee cannot resize an NTFS partition smaller than
        the last sector occupied by system files (major)
* 1708: [installer phase 2] System hangs (major)
* 1740: [other] MPTS does not work (major)
* 1695: [other] MPTS crashes after easy install eCS 2.0 rc3 (major)
* 1733: [other] ACPI Wizard parameter parsing logic (major)
* 1517: [booting of CD] Phase 3 - system hangs on boot logo (major)
* 1455: [other] Genmac driver (major)
* 1731: [other] RC3 on HP d530 with integrated Broadcom  BCM5782 - driver
        refuse to install at boot (major)
* 1742: [other] Couldn't configure MPTS . (major)
* 1454: [other] Drivers and Protocol does not work (major)
* 1684: [other] Scheme Palete doesn't contain a setting for current colors
        (major)
* 1718: [installer phase 2] hang loading BASEDEVs (major)
* 1638: [installer phase 3] ACPI wizzard doesn't work (major)
* 1679: [installer phase 1] on NLS edition RSPINST Fails with 1067 on JFS
        install (major)
* 1666: [booting of CD] LSPeerUser and LSPeerWorkstation classes missing from
        NL (major)
* 1649: [installer phase 2] ACPIDAEMON.EXE line is wrong (major)
* 1637: [installer phase 3] Dual core CPU detected as 1 CPU (major)
* 1605: [installer phase 2] When GRADD selected LCD screen gives out of SYNC
        message... (major)
* 1531: [booting of CD] System hangs on boot logo (major)
* 1664: [other] genmac and Marvell yukon chip (major)
* 1646: [installer phase 2] Locale not set default after install (major)
* 1660: [installer phase 1] SES as a selection (major)
* 1657: [installer phase 1] Multimedia unchecked leaves Multimedia Plugin Pack
        checked and greyed out (major)
* 1561: [other] (eCS 2.0 RC1) Mouse is not working (major)
* 1556: [other] Wrong rc.exe included in eCS 2 rc1 (major)
* 1490: [installer phase 3] Genmac not installing driver correctly (major)
* 1441: [installer phase 1] Long format of Bootable JFS takes TOO long (major)
* 1447: [installer phase 1] Realtek 8101 onboard LAN not recognized; ALC861
        audio not recognized (major)
* 1348: [installer phase 2] Peer does not get installed with easy install path
        (major)
* 1420: [installer phase 3] ACPI eCS 2.0 Beta 3a causing trouble (major)
* 1391: [other] If APM is selected, the shutdown object is not created and it
        is impossible to disable eStyler shutdown (major)
* 1555: [other] Boot hang on Netbind.exe with Genmac loaded and TP 42P (major)
* 1422: [booting of CD] OS/2 !! SYS02027 on Dell Inspiron 9400 (eComStation
        2.0 beta 3 and 3a) (major)
* 1437: [installer phase 2] Dialog enhancer updates failing (major)
* 1047: [installer phase 1] miniLVM gives error and won't continue (major)
* 1477: [other] Can't install eCS 2 beta4 (major)
* 1491: [other] LVM destroys JFS installation (major)
* 1482: [installer phase 3] eCS 2.0 Beta 4 - SmartGuide Error: ""Panel not
        found: smpacpi"" (major)
* 1471: [installer phase 1] Installer puts ACPI snooper on MB's with Nvida
        chipsets (major)
* 1325: [other] Can't Get Sound to Work (major)
* 2763: [Content] Need documentation for formatting large (>2GB) USB data
        sticks (major)
268 resolved major bugs.

== minor bugs ==

* 2454: [other] Unable to start Dos Window Session with Panorama on M3A78-CM
        Motherboard (minor)
* 1293: [other] Unregistered Class (minor)
* 2828: [other] System sounds loop repeatedly (minor)
* 2587: [other] DVD-UDF command-line utilities do not appear to be installed
        (minor)
* 2889: [other] Add broadcom NIC to hw detect (minor)
* 2798: [ACPI] Native Intel driver exists, but installer suggests Genmac
        (minor)
* 2928: [other] SYSTEM CLOCK NOT IN SYNC WITH THE WORLD (minor)
* 1800: [other] Apply ABIOS patch to OS2LDR (minor)
* 2897: [other] NTFS driver deals wrong with read only drives... ? (minor)
* 2890: [installer phase 1] Entering registration key problem (minor)
* 2871: [ACPI] Standard reboot and shut down do not work after installation of
        Uniaud 1.9.3/1.9.23 on T60 (minor)
* 2857: [other] Wrong file size in folder message field on big files (GB)
        (minor)
* 2817: [other] Report on two eCS 2.0GA installs to a 4GB AMD X2 system with
        EIDE &SATA HDDs (minor)
* 2854: [other] Atheros WLAN NIC detected, but drivers installed and
        protocol.ini do not match (minor)
* 2821: [other] APM not installed on T42p although ACPI is deselected (minor)
* 1771: [migration from eCS 1.0 / 1.1 / 1.2] Start File & Print Client object
        corrupted in Startup Folder (minor)
* 2095: [migration from eCS 1.0 / 1.1 / 1.2] Volume Manager object not created
        on migration from 1.2R to RC4 (minor)
* 2311: [migration from eCS 1.0 / 1.1 / 1.2] eComCenter/WarpCenter doesn't
        come up on bootup after migration (minor)
* 2586: [other] Supplied md5 not compatible with distributed md5sum.exe
        (minor)
* 2621: [other] MINSTALL has text error (minor)
* 2144: [other] Add more system utilities (minor)
* 2492: [other] Please add DVD Toys to eCS 2.0 CD#2 (minor)
* 2709: [other] Please add AMP4eCS to CD#2 (minor)
* 2551: [other] Text in BOOT OPTIONS: Keys Help (minor)
* 2787: [other] WIN-OS2 (minor)
* 2528: [other] DHCP settings and long time. (minor)
* 1694: [installer phase 1] eCS 2.0 rc3 easy install does not detect WiFi
        (minor)
* 2077: [other] A very old DOS game TRAPs my RC4 (every time) :-) bootable JFS
        (minor)
* 2626: [other] Bootable JFS (eCS 2) and eCS 1.2M (minor)
* 2773: [installer phase 1] Add vendor add chipset ID's to hardware database
        (minor)
* 2765: [installer phase 1] Updated hardware database (minor)
* 2619: [installer phase 3] When installer switches to SMP kernel the
        corresponding trace and dump facility files aren't installed (minor)
* 2692: [other] Selecting Help from printer port properties opens help in
        background (modal) (minor)
* 2717: [other] XWLan widget problems (minor)
* 2507: [other] Shut down will not complete with Animation turned on (with
        ACPI) (minor)
* 2370: [ACPI] Shutdown + Power off with APM or ACPI induces Exception in
        OS2KRNL (minor)
* 2707: [other] Z! didn't continue (minor)
* 2745: [other] Widget not functioning properly (minor)
* 2761: [other] DOS box issues (minor)
* 1818: [other] Panorama log to root dir (minor)
* 2755: [other] Video is slow as a dog. (minor)
* 2743: [other] Documentation files from UDF 2.01 package should be included
        (minor)
* 2693: [other] ECSINSTALLNETWORK.EXE still has ""old"" NetWare
        configuration panel (minor)
* 2228: [other] WPIRTL.DLL installed to directory on the LIBPATH (minor)
* 1951: [migration from eCS 1.0 / 1.1 / 1.2] eComStation shutdown folder
        (minor)
* 1970: [other] MMOS2 not installed (minor)
* 2646: [ACPI] Legacy APM is installed in Phase 1 even if ACPI is selected
        (minor)
* 2547: [Look & Feel] networking help files (minor)
* 2645: [other] Problem with initial WPS archive created during installation
        (minor)
* 2330: [other] Mispositioned desktop (minor)
* 2344: [booting of CD] Wrong Adaptec driver listed - driver list inconsistent
        ? (minor)
* 2588: [installer phase 1] In the first phase the system hangs during
        ""Merging additional drivers selections (minor)
* 2546: [Content] WLAN (minor)
* 2304: [installer phase 1] Update FAT32 driver to version 0.9.13 (minor)
* 2153: [other] Installation hints for use with Parallels VM (minor)
* 2647: [other] Video Wizard, Panarama - to - Snap - back to - Panarama Fails
        (minor)
* 2460: [booting of CD] SOCKETSK.SYS not found on CD (minor)
* 2600: [installer phase 1] Fails to detect serial port. (minor)
* 2638: [ACPI] pscom.sys should be present before usbcom.sys in config.sys
        (minor)
* 2686: [other] PSCOM does not appear in eCS Kernel (minor)
* 2689: [other] Update components from eCo Software (minor)
* 2643: [other] Missing disk images for makedisk from CD. (minor)
* 2171: [installer phase 3] A repeat of issue 0002147 - Missing file...
        (minor)
* 2386: [other] POPUPLOG.OS2 file is slowly growing... (minor)
* 2639: [installer phase 1] Installer fails to include mouse drivers for dos
        sessions (minor)
* 2613: [other] End drag system sound missing with eWP installed (minor)
* 2592: [other] Conflict with hotkeys in folders context menu (minor)
* 2655: [other] config.sys DPATH entry missing (minor)
* 1516: [other] AHA-152X.ADD will not load without /R:500 switch on PCMCIA.SYS
        (minor)
* 2628: [installer phase 1] Update Help-Tools on CD (Management console)
        (minor)
* 2654: [installer phase 1] Make sure easy install defaults match preselected
        settings in advanced install (minor)
* 2601: [other] BeerBattery widget is installed in the default eCenter.
        (minor)
* 2591: [other] Post-Installation Tasks: USER (minor)
* 2572: [other] rebooting eCS 2.0 (minor)
* 2618: [other] InnoTe

Comments

Category
State
  • 현재 접속자 242 명
  • 오늘 방문자 502 명
  • 어제 방문자 1,567 명
  • 최대 방문자 11,402 명
  • 전체 방문자 2,448,883 명
  • 전체 게시물 3,052 개
  • 전체 댓글수 4,592 개
  • 전체 회원수 104 명

- 쇼핑몰 : Softbox
- 예전 문서 / Old docs
- FTP Server: http://ftp.hanmesoft.com
Facebook Twitter GooglePlus KakaoStory NaverBand